Name: compact passage GST
Brand: Theben
SKU: 2010100

Function description

Presence detector (PIR), with pre-configured cable and Wieland GSTi18 connector, cable length 1,50 meter
Mixed light measurement
Automatic control of lighting and HVAC as well as room monitoring function
Mixed light measurement
Automatic control of lighting and HVAC as well as room monitoring function
Square detection area for corridors
Light switch output (relay, 230 V)
Presence switch output (relay, potential-free)
The rectangular detection area covers an area of up to 30 metres in corridors and enables safe and simple planning
Lighting control with light threshold value and self-learning switch-off delay

Pulse function for staircase time switch
HVAC control with switch-on and switch-off delay
Room monitoring with selective movement detection
The switching behaviour of the presence detector is controlled by presence and light
The self-learning switch-off adjusts to occupants' behaviour
The pulse function is for controlling a staircase time switch
The presence detector has a mixed light measurement and is suitable for switching the following types of lamp: Fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs
Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence
The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay
The sensitivity of the presence switch output is reduced in the "monitoring" position. The contact indicates the presence of people with a high degree of certainty
Test operation mode checks the detection area and installation
The parameters can either be set using the potentiometer or via the optional service remote control SendoPro 868-A

Technical data

Operating voltage	230 V AC
Frequency	50 Hz
Installation height	2 - 6 m
Installation type	Ceiling installation
Colour	White
Power consumption	~0.7 W
Light measurement	Mixed light measurement
Setting range brightness	10 - 1500 lx
Light switch-off delay	Impuls, 10 s - 20 min
Type of contact light	Relay 230 V
Lamp types	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Resistive load	1400 VA
Incandescent/halogen lamp load	1200 W
Compact and flourescent lamps	960 VA (cos f = 0,8), 580 VA (cos f = 0,5)
Inrush current	max. 400 A / 200 µs
Energy saving lamps	10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W)
LED lamp < 2 W	25 W
LED lamp 2-8 W	70 W
LED lamp > 8 W	80 W
Switch-on delay presence	0 s - 10 min
Presence switch-off delay	10 s - 120 min
Type of contact presence	Relay potential-free
Switching capacity presence	50 W (220 V DC), 50 VA (250 V AC) min. 0,5 mV/10 mA
Type of connection	Screw terminals
Max. cable cross section	2 x 2,5 mm²
Mounting plate	70 x 70 mm
Size of concealed housing	55 mm
Switching output	Potential-free, Light \| Presence
Detection range	150 m² (30,0 x 5 m)
Detection angle	360°
Ambient temperature	0°C ... 50°C
Type of protection	IP 40

Operating instructions	PDF	compact-passage (503,7 kB)

QuickSafe

Item no. 9070531

To the product Data sheet